113 Hackberry Lane

Hickory Creek, TX 75065

Michael Dolan

Objective

Education

To use my skills and knowledge of construction to bring projects in on time,

on budget and safely while working in a team oriented atmosphere.

1998 – 2000

College of the Redwoods

Eureka, California

Construction Management with a minor in Computer Sciences

  § I have completed the two years of the Construction Technology course

  § I have completed the two years of Residential and Industrial Electricity and have

received a Certificate of Completion with High Honors.

  § I have completed the courses in Building Codes and National Electric Code

courses in which I received A’s in both of the classes

  § Completed and am certified in the EPA mandated RRP program

Work experience

7/2014 – 3/2015 Royal Glass Co.

Project Manager

Denton, Texas

I was acting as a project manager for 7 medium size projects all over the

extended Dallas area. Some of my responsibilities included facilitating

hand off meetings from estimating to construction, contract execution with

ownership, the entire submittal process from selecting the different products

and systems making sure that we are covered through the

estimate/contract/specs, to submission to the contractor, to final approvals.

I performed my own take offs and compared with the original estimate,

prepared request for quote and sent to vendors, and then again comparing

them and developing purchase orders and placement of materials orders. I

also reviewed and signed off on my invoices for the project, as well as

developing any and all change order work ups, and monthly billings via the

pay apps. I acted as the hub for coordination between the field thru the

superintendents and foreman, the shop and fabricators/glaziers, the drafting

and estimating departments, accounts payable and receivables, and interact

with the owner of the company daily and keep him apprised of the status of

the jobs. I was the point of contact for the general contractors and I was in

constant communication with them regarding RFIs, COR, drawing changes,

conflicts with drawings or field conditions, weekly coordination meetings,

schedules and durations, and anything else that might arise during the

projects.

12/2013 – 6/2014

Self Employed

Owner and Operator

During this short period of time, I did work in the residential field performing

various types of work from small repairs up to designing and planning medium

size home remodels and upgrades. I perform all of my own work from the field

work to the paper work and accounting requirements.

Denton, Texas

Phone-(469) 474-8176

E-mail – cwby44@gmail.com

4/2011-10/2013 Allsouth Subcontractors Inc.

General Superintendent

Birmingham, Alabama

I was working as the general superintendent for the sloped roofing division of

Allsouth. We specialize in architectural metal roofing and trims with projects in

Tennessee down to the Gulf Coast and up to Huntsville and everywhere in

between. I have a work force of approximately 40 guys depending on the time

and where we are at in projects. I am responsible for scheduling man power,

equipment, material procurement and deliveries, quality assurance, safety of my

guys, inspections, interaction with general contractors and owner’s

representatives. I also take care of ensuring that we are performing work that we

are contracted to do and seeking change orders for any additional work that is

requested of us. I review every bid that our office personnel calculate and develop

the means and methods to how we are going to approach each job. This year we

will finish two multi-million dollar projects as well as several in the hundreds of

thousands range. These projects range from new high schools, veterans homes,

higher education buildings, industrial projects, several government buildings, and

so on.

1/2010-4/2011

B & B Construction

Owner and Operator

I got back into working for myself for a small time to take care of a few projects

that I was approached to build/remodel. During this time I did everything that an

owner would take care – owner interactions, bidding, buying out materials,

performing portions of work, overseeing subs, billings, accounts payables, etc. I

did these projects because I was highly recommended for them by close colleagues

how have helped me out greatly in the past.

2/2009-1/2010

Physical Security

Senior Project Manager

As the Senior Project Manager for this custom curtain wall manufacturer I oversaw

3 project managers covering projects from Sante Fe, NM to Birmingham, AL up

along the East Coast into the Washington DC area. I helped and guided these PMs

in working through the hand off from sales department to construction, through

design and shop drawings and fabrication tickets, into material selection through

submittals and approvals ending in material procurement. We worked through the

in-house manufacturing of our units all the way to installation and customer

acceptance. As the Senior PM I was also running the biggest and highest profile

projects that we had. I spear-headed the large team for the first phase of a multiphase/year

project for the State Department’s (Washington DC) modernization

and security upgrades. Our team took a 60 year old punch window and curtain

wall system and redesigned and engineered to meet DoD standards for blastresistant

curtain walls and windows. We worked through design development,

blast mitigation engineering, acceptance by the Historic Architectural Board for

DC, through blast testing of our new systems in Texas, through manufacturing of

8 different systems for the building, and finally installation back up at the State

Department building. One of my biggest accomplishments in my career is taking

a new 10” thick window wall system with 3” thick glass and making it look just

like a 60 year 1 ¾” thick system with ¼” glass.

10/2005 – 2/2009

Opus South

Project Superintendent

I was the Project Superintendent for a design build project for the General Service

Administration and Social Security Administration’s South East Regional

Headquarters in Birmingham Alabama. I was in charge on site of the $150 M

585,000 sqft 8 story building. My staff included up to 6 assistant superintendents

and 2 foremen who ran a crew of 30 men. I coordinated with this crew the daily

trade activities while I developed and maintained the schedule and pushed the job.

My other duties included conducting weekly sub meetings and working with the

Birmingham, Alabama

Bessemer, Alabama

Helena, Alabama

Project Managers in their meetings to make sure we were all working towards the

schedule. I had to interact a tremendous amount with the government’s PMs to

ensure the project was ready when they started moving from their old site to this

one. I worked with the engineers and the architects to find solutions to daily

complications that came up on site.

7/2003 – 1/2005

Superintendent

The Hanover Company

Dallas, Texas

I was a superintendent for a design build 22 story high rise luxury apartment tower

in uptown Dallas, Tx. I started with all of the underground and civil work, ran the

structural portion of the project including the piers, slab on grade, and suspended

post tensioned slabs. Worked with and coordinated with architects and engineers

to work through structural problems. As the structural portion of the project

wound down I took the bare decks and oversaw the completion of 2 floors of non

standard apartment units as well as the public areas (clubhouse, lobby, lounge area,

and pool deck – 5th floor). I was in charge of coordinating the extremely high end

finishes with interior designers and sub contractors.

8/2001 – 3/2003

Superintendent

Turner Construction

Dallas, Texas

I was a superintendent for a 40 M 17 story high rise apartment complex in Las

Colinas, Tx from concrete pours all the way through to finish out and completion

of punch-list. My responsibilities were managing day to day field operations of

the tower portion of the project. This included management of all phase and trades

of construction. I also looked after safety and EPA duties around the site. At the

completion of that project I was assigned to the Homeland Securities TSA

program were I travel all around Texas, New Mexico, Oklahoma and Louisiana

acting as a superintendent for security upgrades at various airports.

6/2000 – 8/2001

Turner Construction

Santa Clara, California

Project Engineer/Assistant Project Manager

I was a Project Engineer for a 5 M E-Business Solution Center and Project

Manager for 6 different jobs totaling 10 M. These were all different classifications

cleanrooms for Intel’s main campus. Some of my responsibilities were creating

bid packages, budgets or GMPs, contracts, managing Change Order process,

negotiating change orders and contracts, creating pay applications and managing

subs and fellow workers for these large and complicated jobs.

9/1998 – 5/2000

Lead Carpenter

I was in charge of a crew of around 6 people while building a house for the

College of the Redwoods Construction Program. We built the house from

foundation to finish. Also I have completed several construction classes

including: construction theory, estimating, Autocad 2000, and classes in

accounting and business.

College of the Redwoods

Eureka, CA

Major Skills

Over 20 years experience with Windows and computer operations

including Microsoft Office with Outlook, Word, Excel, and Access.

Currently I have been working “paperless” using a convertible

computer/tablet to run jobs off of.

Proficient with in navigating complex computer networks including SFTP

and FTP sites

Previously gained security access at several government sites and

agencies including Social Security, State Department, and Homeland

Security

11 years experience with Microsoft Projects scheduling software

3 years experience with SureTrak scheduling software

3 years of proficiency in Prolog Manager program

5 years experience in Timberline Project Management and Accounting

software

5 years experience in working with LEED requirements

10 years of AutoCAD and MicroStation CAD experience

5 year work with 3D programs such as AutoCAD inventor, Solid Works,

and AutoCAD Revit.

Certified in 10 hour and 30 hour OSHA class.

Lead Safe Certified – EPA’s RRP

Up to date on certifications for operating all type of common equipment on

a job

Came up out of the field and am very hands on orientated. Not afraid to

get in there and show someone how to do something. Have all of my own

equipment as well as some very advanced pieces and systems

Can estimate and gauge man-power very well

Proficient in estimating both small and large projects

Certified in CPR and Advanced First Aid

Strong team player

Driven, hardworking and talented